Automatically Loading The Atm Driver; Manually Loading The Atm Driver - Adaptec 5ANA-940 User Manual

ANA-5910/5930/5940 User's Guide
19
Complete one of the following steps:
a
If you do not want to install additional drivers, select No
and press Enter.
b
If you want to install additional drivers, select Yes and press
Enter.
The Select a driver to install menu appears. Refer to your
Novell NetWare documentation for information about
installing drivers from other manufacturers.
20
From the Additional Driver Actions menu, select Return to the
previous menu and press Enter.
21
From the Driver options menu, select Return to the previous
menu and press Enter.
22
From the Installation Options menu, select Exit and press
Enter.
23
From the Exit INSTALL menu, select Yes and press Enter.

Automatically Loading the ATM Driver

When you install the ATM software, the installation program
configures the server to automatically load the ATM driver at
system boot. During installation, the following line is added to the
autoexec.ncf file:
sys:\system\atms.ncf
If you do not want the ATM driver to automatically load at system
boot, comment out the sys:\system\atms.ncf line.

Manually Loading the ATM Driver

To manually load the ATM driver for both Novell NetWare 3.12 and
4.1
1
Comment out the sys:\system\atms.ncf line in the autoexec.ncf
file.
2
Bring down the server.
3
Boot the server.
8-14