Installing The Driver When Installing Netware; Netware 3.12/3.2 - Adaptec P2280A Manual

Ultra160 Family Manager Set User's Guide

Installing the Driver When Installing NetWare

To install the adpt160m.ham driver when you install NetWare,
follow the instructions below for the version of NetWare you are
installing.

NetWare 3.12/3.2

Follow these instructions only if you are installing NetWare 3.12/3.2
for the first time:
1
To complete the NetWare 3.12/3.2 installation, you must go to
the Novell Web site at:
http://developer.novell.com/devres/sas/certinfo.htm
and then download the nwpa_up.exe update patch from the
link at Download the NWPA Update Package.
2
Create the DOS partition on the boot hard disk drive.
3
If you are installing NetWare 3.12/3.2 from a CD-ROM
attached to an Adaptec Ultra160 Family host adapter, follow
the instructions in Install CD-ROM Drivers on a DOS Bootable
Hard Disk on page 3-2 to configure your computer for
CD-ROM access.
If you are installing NetWare 3.12/3.2 from a CD-ROM
attached to a host adapter other than an Adaptec Ultra160
Family host adapter, refer to your CD-ROM or computer
documentation for instructions on configuring your computer
for CD-ROM access.
4
Reboot your computer after configuring for CD-ROM access.
5
Follow the instructions in your NetWare documentation for
installing a new server.
6
After NetWare installs the DOS portion of the software, down
and exit to DOS from the server prompt.
7
Copy the adpt160m.ham and adpt160m.ddi from the NetWare
directory of the Ultra160 Family Manager Set disk for NetWare
to the c:\server.312 directory.
4-2