Devicenet™ Operation - Advanced Energy HFV 8000 User Manual

4 0 = Power off
4 1 = Power on
• Bit 1 = SPS (set point status)
4 0 = Not at set point
4 1 = At set point
• Bit 2 = TS (temperature status)
4 0 = Overtemperature
4 1 = Not at overtemperature
• Bit 3 = Not used
• Bit 4 = INTS (interlock status)
4 0 = Interlock not satisfied
4 1 = Interlock satisfied
• Bits 5 through 7 = Not used
Note 6: Maximum power expressed in 12 bit A/D units with upper 4 bits = 0.
Note 7: Not used—dummy value.
Note 8: Not used—dummy value.
DeviceNet™ Operation
When the HFV generator is energized (powers on), it defaults to user control mode;
however, engaging the DeviceNet port from the DeviceNet master places the HFV
generator under DeviceNet control until the next time the HFV generator input power
is cycled (turned off and then on).
5705211-C Communication Interfaces
HFV 8000 Generator
4-53