Host Connector And Pin Descriptions; Table 4-2. Host Port Connector; Figure 4-8. Serial Ae Bus Host Port Connector - Advanced Energy HFV 8000 User Manual

®
Advanced Energy
available functions, see
Bus host software, please contact AE Global Customer Support (see
Customer Support" on page
Note: The unit is configured at the factory to use RS-232 but may be changed to RS-
422 or RS-485 by contacting AE Technical Support (see
Support" on page

Host Connector and Pin Descriptions

The serial AE Bus Host port is a 9-pin, female, shielded, subminiature-D connector.
To access the Host port:
1. Use a screwdriver to remove the two screws from the rear panel access cover (see
Figure 5-2 on page
2. Remove the rear panel access cover. The Host port connector and an 8-position
DIP switch are directly behind the cover.
Figure 4-8 shows the serial Host port, and

Figure 4-8. Serial AE Bus Host port connector

Table 4-2. Host port connector

Pin
1
2
3
4
5
6
7
4-10
"AE Bus Command Set" on page
6-10).
6-10).
5-4).
Name
RESERVED Reserved for future use
TXD RS-232 transmit data
RXD RS-232 receive data
RESERVED Reserved for future use
COM Data common
TR− RS-485 (−) xmit/rx data/RS-422 (−) rx data
TR+ RS-485 (+) xmit/rx data/RS-422 (+) rx data
Communication Interfaces
4-18. To obtain sample AE
"AE Global Customer
Table 4-2 describes each pin.
Description
"AE Global
5705211-C