Table of Contents
Advertisement
Table 3-2. Physical specifications
Description
Size
Weight
Connector/cable specifications
RF output
AC input power
Generator User port
Host port
DeviceNet port
Coolant
ELECTRICAL SPECIFICATIONS
Table 3-3
describes the electrical specifications for the HFV generator.
Table 3-3. Electrical specifications
Description
Input power specifications
Line voltage
Line frequency
5705211-C
Specification
13.3 cm (H) x 43.2 cm (W) x 51.4 cm (D) 5.25
"
"
17.0
(W) x 20.25
(D).
"
Allow 10.16 cm (4.0
) additional depth for line cord
service loop (right-hand side of rear panel).
"
Allow 3.81 cm (1.50
) additional depth for the RF
output cover (left-hand side of rear panel).
"
Allow 11.94 cm (4.7
) additional depth for the
optional water solenoid.
See also
Figure 3-1 on page
34 kg (75 lb) maximum
SQS™ female connector
Note: RF output cable not provided; RG-393 or
equivalent recommended
4-wire cord, 10 mm (8 AWG), 60 cm (2´) long with
Hubbell connector (CS8365C).
15-pin, shielded, female, subminiature-D
9-pin, shielded, female, subminiature-D
Either a 5-pin, 12 mm "Micro" Lumberg RSF 5/0.5 or
Turck FS 4.5 series connector
"
3/8
stainless steel, female NPT
Specification
208 V, 3 φ with ground; no neutral connection
required
50/60 Hz
Product Specifications
HFV 8000 Generator
"
(H) x
3-4.
3-5
Advertisement
Table of Contents
