Table 4-7. Host Port Commands - Advanced Energy HFV 8000 User Manual

®
Advanced Energy
Table 4-7 lists the Host commands.

Table 4-7. Host port commands

Command Description
Sets the minimum frequency.
3
minimum
Note: This command is invalid when the unit
frequency
Send four bytes, least significant byte first,
representing the minimum frequency value in
Hertz.
• Range is 1765000 to 2165000, but the
• For example, enter 2000000
Set maximum frequency with command 4.
Set starting frequency value with command 5.
Read back with command 133. See also
"Frequency Limits" on page
Sets the maximum frequency. Send four
4
bytes, least significant byte first, representing
maximum
frequency
the maximum frequency value in Hertz.
Note: This command is invalid when the unit
• Range is 1765000 to 2165000, but the
• For example, enter 2000000
Set minimum frequency with command 3.
Set starting frequency value with command 5.
Read back with command 134. See also
"Frequency Limits" on page
4-20
is in center frequency mode.
value cannot be greater than the value set
by command 4 (maximum frequency).
(2,000,000 Hz).
5-14.
is in center frequency mode.
value cannot be less than the value set by
command 3 (minimum frequency).
(2,000,000 Hz).
5-14.
Communication Interfaces
Number of Number of
Host Data Response
Bytes Data Bytes
4 1
CSR only
4 1
CSR only
5705211-C