Advanced Energy HFV 8000 User Manual page 55

• Commands 1 through 127 request a change to the HFV generator, such as turning
output on or off or changing a setting in the unit. The unit responds to these
commands by sending a command status response (CSR). This single-byte
response indicates whether the unit has accepted or rejected the command and, in
the case of rejection, the reason the unit could not respond to the command. For
more information on CSR codes, see
Codes" on page
• Command numbers 128 through 255 request information from the unit, such as
output on/off status and unit settings. The unit responds to these commands by
sending the data requested.
5705211-C
"AE Bus Command Status Response (CSR)
4-18.
Communication Interfaces
HFV 8000 Generator
4-19