Table of Contents
Advertisement
Product Specifications
FUNCTIONAL SPECIFICATIONS
Table 3-1
describes the functional specifications of the HFV generator.
Table 3-1. Functional specifications
Description
Output regulation modes
Interface configurations
Host port control features
DeviceNet control features
5705211-C
Specification
The HFV generator provides forward power and load
(delivered) power regulation modes, as measured at the
RF output.
To set, see:
• Command 12 in
Table 4-7 on page 4-20
The HFV generator has a 15-pin analog Generator User
port for generator control. In addition, it has is a 5-pin
DeviceNet interface. A 9-pin serial Host port (RS-232,
RS-422, and RS-485 compatible) is available for pre-
selecting the frequency or frequency tuning algorithm.
You can access the 9-pin Host port through a rear panel
access cover (see
"Host Connector and Pin
Descriptions" on page 4-10
The Host port controls the frequency and frequency
tuning algorithm, along with other control features (see
"AE Bus Command Set" on page
The DeviceNet interface allows you to set a power
set point and enable/disable the output. Read back
values are provided for forward regulation, reflected
power, and various status bits (see
on page
4-37).
Product Specifications
HFV 8000 Generator
and
Figure 5-2 on page
5-4).
4-18).
"DeviceNet™ Port"
Chapter
Chapter
3
3-1
Advertisement
Table of Contents
