Igmp Snooping Commands - D-Link xStack DES-3800 Series Cli Manual

Layer 3 stackable fast ethernet managed switch
Hide thumbs Also See for xStack DES-3800 Series:
Table of Contents

Advertisement

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

IGMP Snooping Commands

The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
config igmp_snooping
config igmp_snooping
querier
config router_ports
enable igmp_snooping
show igmp_snooping
disable igmp_snooping
show igmp snooping
group
show router_ports
show igmp_snooping
forwarding
show igmp_snooping
group
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Syntax
Description
Parameters
Parameters
[ <vlan_name 32> |all] { host_timeout <sec 1-16711450> |
router_timeout<sec 1-16711450> | leave_timer <sec 0-
16711450> | state [enable|disable] |
fast_leave[enable|disable]}
[<vlan_name 32> | all] {query_interval <sec 1-65535> |
max_response_time <sec 1-25> | robustness_variable <value
1-255> | last_member_query_interval <sec 1-25> | state
[enable | disable]}
<vlan_name 32> [add | delete] <portlist>
{forward_mcrouter_only}
{vlan <vlan_name 32>}
{forward_mcrouter_only}
vlan <vlan_name 32>
{vlan <vlan_name 32>} {static | dynamic}
{vlan<vlan_name 32>}
{vlan<vlan_name 32>}
Used to configure IGMP snooping on the Switch.
config igmp_snooping [<vlan_name 32> | all] {host_timeout
<sec 1-16711450> | router_timeout <sec 1-16711450> |
leave_timer <sec 0-16711450> | state [enable | disable]}
[ <vlan_name 32> |all] { host_timeout <sec 1-16711450> |
router_timeout<sec 1-16711450> | leave_timer <sec 0-
16711450> | state [enable|disable] | fast_leave [enable|disable] }
This command allows you to configure IGMP snooping on the
Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
is to be configured.
host_timeout <sec 1-16711450> − Specifies the maximum amount of
time a host can be a member of a multicast group without the Switch
receiving a host membership report. The default is 260 seconds.
router_timeout <sec 1-16711450> − Specifies the maximum amount
of time a route can be a member of a multicast group without the
133
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3828pDes-3828Des-3828dc

Table of Contents