D-Link xStack DES-3800 Series Cli Manual page 208

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example Usage:
To view the global VRRP settings currently implemented on the Switch (VRRP Enabled):
DES-3800:4#show vrrp
Command: show vrrp
Global VRRP
Non-owner response PING : Disabled
Interface Name
Authentication type
Total Entries : 1
DES-3800:4#
delete vrrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a VRRP entry:
DES-3800:4#delete vrrp vrid 2 ipif Trinity
Command: delete vrrp vrid 2 ipif Trinity
Success.
DES-3800:4#
: No Authentication
VRID
Virtual IP Address
Virtual MAC Address
Virtual Router State
State
Priority
Master IP Address
Critical IP Address
Checking Critical IP
Advertisement Interval : 1 secs
Preempt Mode
Virtual Router Up Time : 2754089 centi-secs
Used to delete a vrrp entry from the switch.
delete vrrp {vrid <vrid 1-255> ipif <ipif_name 12>}
This command is used to remove a VRRP router running on a local
device.
vrid <vrid 1-255> - Enter the VRRP ID of the virtual router to be
deleted. Not entering this parameter will delete all VRRP entries on
the Switch.
ipif <ipif_name 12> - Enter the name of the IP interface which holds
the VRRP router to delete.
Only administrator-level users can issue this command.
:Enabled
: System
: 2
: 10.53.13.3
: 00-00-5E-00-01-02
: Master
: Enabled
: 255
: 10.53.13.3
: 0.0.0.0
: Disabled
: True
203