D-Link xStack DES-3800 Series Cli Manual page 185

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config cpu access_profile
Restrictions
Example usage:
To configure cpu access list entry:
DES-3800:4#config cpu access_profile profile_id 5 add access_id 1
ip vlan default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3
icmp type 11 code 32 port 1 deny
Command: config cpu access_profile profile_id 10 add access_id 1
ip vlan default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3
icmp type 11 code 32 port 1 deny
Success.
DES-3800:4#
enable cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable CPU interface filtering:
DES-3800:4#enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DES-3800:4#
disable cpu_interface_filtering
Purpose
byte 48 to byte 63.
offset_64-79 - Enter a value in hex form to mask the packet from
•
byte 64 to byte 79.
permit | deny – Specify that the packet matching the criteria configured with
command will either be permitted entry to the cpu or denied entry to the
cpu.
delete access_id <value 1-100> - Use this to remove a previously created
access rule in a profile ID.
Only administrator-level users can issue this command.
Used to enable CPU interface filtering on the Switch.
enable cpu_interface_filtering
This command is used, in conjunction with the disable
cpu_interface_filtering command below, to enable and disable
CPU interface filtering on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable CPU interface filtering on the Switch.
180