D-Link xStack DES-3800 Series Cli Manual page 323

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Command: config greeting_message
Banner Editor
================================================================================
this is the best switch ever
================================================================================
<Function Key>
Ctrl+C Quit without save
Ctrl+W Save and quit
config command prompt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To modify the command prompt to "Geeksrule":
<Control Key>
left/right/
up/down
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
Used to Configure the command prompt.
config command_prompt [<string 16> | username | default]
Administrator level users can use this command to change the
command prompt.
string 16 - The command prompt can be changed by entering a
new name of no more that 16 characters.
username - The command prompt will be changed to the login
username.
default – The command prompt will reset to factory default
command prompt.
Only administrator-level users can issue this command. Other
restrictions include:
•
If the "reset" command is executed, the modified
command prompt will remain modified. However, the
"reset system" command will reset the command prompt to
the original factory banner.
Move cursor
318