D-Link xStack DES-3800 Series Cli Manual page 221

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:4#
Example Usage:
To enable static table lookup for DNS relay.
DES-3800:4#enable dnsr static
Command: enable dnsr static
Success.
DES-3800:4#
disable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable status of DNS relay.
DES-3800:4#disable dnsr
Command: disable dnsr
Success.
DES-3800:4#
Example Usage:
To disable cache lookup for DNS relay.
DES-3800:4#disable dnsr cache
Command: disable dnsr cache
Success.
DES-3800:4#
Example Usage:
To disable static table lookup for DNS relay.
DES-3800:4#disable dnsr static
Command: disable dnsr static
Used to disable DNS relay on the Switch.
disable dnsr {cache | static}
This command is used, in combination with the enable dnsr
command above, to enable and disable DNS Relay on the Switch.
cache – This parameter will allow the user to disable the cache
lookup for the DNS rely on the Switch.
static – This parameter will allow the user to disable the static table
lookup for the DNS rely on the Switch.
Only administrator-level users can issue this command.
216