D-Link xStack DES-3800 Series Cli Manual page 134

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable autoconfig
Restrictions
Example usage:
To enable autoconfiguration on the Switch:
DES-3800:4#enable autoconfig
Command: enable autoconfig
Success.
DES-3800:4#
When autoconfig is enabled, the Switch becomes a DHCP client automatically
(same as: config ipif System dhcp). The DHCP server must have the TFTP server
IP address and configuration file name, and be configured to deliver this
information in the data field of the DHCP reply packet. The TFTP server must be
running and have the requested configuration file in its base directory when the
request is received from the Switch. Consult the DHCP server and TFTP server
software instructions for information on loading a boot file or configuration file.
NOTE: More detailed information for this command and
related commands can be found in the section titled Switch
Utility Commands.
129