D-Link xStack DES-3800 Series Cli Manual page 290

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:4#
config ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To configure the SSH server:
DES-3800:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DES-3800:4#
show ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the SSH server:
DES-3800:4# show ssh server
Command: show ssh server
Used to configure the SSH server.
config ssh server {maxsession <int 1-8> | timeout <sec 120-
600> | authfail <int 2-20> | rekey [10min | 30min | 60min | never]
This command allows you to configure the SSH server.
maxsession <int 1-8> - Allows the user to set the number of users
that may simultaneously access the Switch. The default setting is 8.
contimeout <sec 120-600> - Allows the user to set the connection
timeout. The user may set a time between 120 and 600 seconds.
The default is 300 seconds.
authfail <int 2-20> - Allows the administrator to set the maximum
number of attempts that a user may try to logon utilizing SSH
authentication. After the maximum number of attempts is exceeded,
the Switch will be disconnected and the user must reconnect to the
Switch to attempt another login.
rekey [10min |30min | 60min |never] - Sets the time period that the
Switch will change the security shell encryptions.
Only administrator-level users can issue this command.
Used to display the SSH server setting.
show ssh server
This command allows you to display the current SSH server setting.
None.
None.
285