D-Link xStack DES-3800 Series Cli Manual page 96

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To clear all FDB dynamic entries:
DES-3800:4#clear fdb all
Command: clear fdb all
Success.
DES-3800:4#
show multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display multicast MAC address table:
DES-3800:4#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries
DES-3800:4#
show fdb
Purpose
Syntax
Description
Used to display the contents of the Switch's multicast forwarding
database.
show mulitcast_fdb [vlan <vlan_name 32> | mac_address
<macaddr>]
This command is used to display the current contents of the
Switch's multicast MAC address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that is present in the forwarding
database table.
None.
: default
: 01-00-5E-00-00-00
: 1-5
: Static
: 1
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
91