Command Syntax - D-Link xStack DES-3800 Series Cli Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

Command Syntax

The following symbols are used to describe how command entries are made and values and arguments are
specified in this manual. The online help contained in the CLI and available through the console interface
uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
Encloses a variable or value that must be specified.
create ipif <ipif_name> vlan <vlan_name 32> ipaddress
<network_address>
In the above syntax example, you must supply an IP interface name
in the <ipif_name> space, a VLAN name in the <vlan_name 32>
space, and the network address in the <network_address> space.
Do not type the angle brackets.
create ipif Engineering vlan Design ipaddress
10.24.22.5/255.0.0.0
Encloses a required value or set of required arguments. One value
or argument can be specified.
create account [admin | user]
In the above syntax example, you must specify either an admin or a
user level account to be created. Do not type the square brackets.
create account admin
Separates two or more mutually exclusive items in a list, one of
which must be entered.
show snmp [community | detail]
In the above syntax example, you must specify either community,
or detail. Do not type the backslash.
show snmp community
9
3