D-Link xStack DES-3800 Series Cli Manual page 159

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Config 802.1x auth_mode
Parameters
Restrictions
Example usage:
To configure 802.1x authentication by MAC address:
DES-3800:4#config 802.1x auth_mode mac_based
Command: config 802.1x auth_mode mac_based
Success.
DES-3800:4#
Config 802.1x capability ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x capability on ports 1-10:
DES-3800:4#config 802.1x capability ports 1 – 10 authenticator
Command: config 802.1x capability ports 1 – 10 authenticator
Success.
DES-3800:4#
config 802.1x auth_parameter
Purpose Used to configure the 802.1x Authentication parameters on a range of ports. The default
parameter will return all ports in the specified range to their default 802.1x settings.
Syntax config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] |
[port_based | mac_based] − The Switch allows you to authenticate
802.1x by either port or MAC address.
Only administrator-level users can issue this command.
Used to configure the 802.1x capability of a range of ports on the
Switch.
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
The config 802.1x command has four capabilities that can be set for
each port. Authenticator, Supplicant, Authenticator and Supplicant,
and None.
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies all of the ports on the Switch.
authenticator − A user must pass the authentication process to gain
access to the network.
none − The port is not controlled by the 802.1x functions.
Only administrator-level users can issue this command.
t t l [f th | t | f th] |
154
i t i d < 0 65535> |