D-Link xStack DES-3800 Series Cli Manual page 41

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
create snmp community
Parameters
Restrictions
Example usage:
To create the SNMP community string "dlink:"
DES-3800:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DES-3800:4#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
DES-3800:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3800:4#
<community_string 32> − An alphanumeric string of up to 32 characters that is used
to identify members of an SNMP community. This string is used like a password to
give remote SNMP managers access to MIB objects in the Switch's SNMP agent.
<view_name 32> − An alphanumeric string of up to 32 characters that is used to
identify the group of MIB objects that a remote SNMP manager is allowed to access
on the Switch.
read_only − Specifies that SNMP community members using the community string
created with this command can only read the contents of the MIBs on the Switch.
read_write − Specifies that SNMP community members using the community string
created with this command can read from and write to the contents of the MIBs on
the Switch.
Only administrator-level users can issue this command.
Used to remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
Only administrator-level users can issue this command.
36