D-Link xStack DES-3800 Series Cli Manual page 201

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
System
System
System
System
System
System
System
System
System
System
Total Entries = 20
DES-3800:4#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To remove dynamic entries in the ARP table:
DES-3800:4#clear arptable
Command: clear arptable
Success.
DES-3800:4#
10.17.42.153 00-80-C8-4D-4E-0A
10.19.72.100 00-50-BA-38-7D-5E
10.21.32.203 00-80-C8-40-C1-06
10.40.44.60 00-50-BA-6B-2A-1E
10.42.73.221 00-01-02-03-04-00
10.44.67.1 00-50-BA-DA-02-51
10.47.65.25 00-50-BA-DA-03-2B
10.50.8.7 00-E0-18-45-C7-28
10.90.90.90 00-01-02-03-04-00
10.255.255.255 FF-FF-FF-FF-FF-FF
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the Switch's ARP table. Static ARP table entries are not affected.
None.
Only administrator-level users can issue this command.
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local
Local/Broadcast
196