xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure the traffic scheduling mechanism for each queue:
DES-3800:4# config scheduling 0 max_packet 12
Command: config scheduling 0 max_packet 12
Success.
DES-3800:4#
show scheduling
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current scheduling configuration:
DES-3800:4#show scheduling
Command: show scheduling
QOS Output Scheduling
Class-0
Class-1
Class-2
Class-3
Class-4
Class-5
Class-6
Class-7
DES-3800:4#
config 802.1p user_priority
Purpose
Syntax
Used to display the currently configured traffic scheduling on the
Switch.
show scheduling
The show scheduling command will display the current traffic
scheduling mechanisms in use on the Switch.
None.
None.
MAX. Packets
-------------
1
2
3
4
5
6
7
8
Used to map the 802.1p user priority of an incoming packet to one
of the four hardware queues available on the Switch.
config 802.1p user_priority <priority 0-7> <class_id 0-7>
102