D-Link xStack DES-3800 Series Cli Manual page 54

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location for "
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "
Success.
DES-3800:4#
Used to enter a description of the location of the Switch.
config snmp system_location <sw_location>
The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only administrator-level users can issue this command.
DES-3800:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3800:4#
Used to configure the name for the Switch.
config snmp system_name <sw_name>
The config snmp system_name command configures the name of
the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
DES-3800:4#config snmp system_name DES-3828 Switch
Command: config snmp system_name DES-3828 Switch
Success.
DES-3800:4#
":
H Q 5 F
D E S - 3 8 2 8 S w i t c h ":
49