D-Link xStack DES-3800 Series Cli Manual page 110

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure 802.1p default priority on the Switch:
DES-3800:4#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DES-3800:4#
show 802.1 default_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
Used to display the currently configured 802.1p priority value that
will be assigned to an incoming, untagged packet before being
forwarded to its destination.
show 802.1p default_priority {<portlist>}
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that will be assigned to an
incoming, untagged packet before being forwarded to its
destination.
<portlist> − Specifies a port or range of ports to be configured.
None.
DES-3800:4# show 802.1p default_priority
Command: show 802.1p default_priority
Port Priority
------- -----------
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
16 0
17 0
18 0
19 0
20 0
21 0
22 0
23 0
24 0
105