Command History List - D-Link xStack DES-3800 Series Cli Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

Command History List

The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
?
dir
config
command_history
show
command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the commands in the CLI:
Parameters
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
?
This command will display all of the commands available through
the Command Line Interface (CLI).
None.
None.
DES-3800:4#?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
309
44