D-Link xStack DES-3800 Series Cli Manual page 43

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:4#config snmp 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3800:4#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DES-3800:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-3800:4#
create snmp group
Purpose
Syntax
Description
Parameters
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
None.
Used to create a new SNMP group, or a table that maps SNMP users
to SNMP views.
create snmp group <groupname 32> [v1 | v2c | v3
[noauth_nopriv | auth_nopriv | auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
The create snmp group command creates a new SNMP group, or a
table that maps SNMP users to SNMP views.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group the new SNMP user will be
associated with.
v1 – Specifies that SNMP version 1 will be used. The Simple Network
Management Protocol (SNMP), version 1, is a network management
protocol that provides a means to monitor and control network
devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
38