D-Link xStack DES-3800 Series Cli Manual page 136

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To configure the IGMPv2 for all IP interfaces.
DES-3800:4#config igmp all version 2
Command: config igmp all version 2
Success.
DES-3800:4#
show igmp
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
Used to display the IGMP configuration for the Switch of for a
specified IP interface.
show igmp {ipif <ipif_name 12>}
This command will display the IGMP configuration for the Switch
if no IP interface name is specified. If an IP interface name is
specified, the command will display the IGMP configuration for
that IP interface.
<ipif_name 12> − The name of the IP interface for which the
IGMP configuration will be displayed.
None.
131