D-Link xStack DES-3800 Series Cli Manual page 52

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable snmp authenticate traps
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-3800:4#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DES-3800:4#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DES-3800:4#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Traps : Enabled
DES-3800:4#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
This command is used to enable SNMP authentication trap support on the Switch.
None.
Only administrator-level users can issue this command.
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
Only administrator-level users can issue this command.
: Enabled
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the Switch.
None.
Only administrator-level users can issue this command.
47