D-Link xStack DES-3800 Series Cli Manual page 80

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Command
config stp instance _id
delete stp instance_id
config stp priority
config stp
mst_config_id
config stp mst_ports
show stp
show stp ports
show stp instance_id
show stp mst_config id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-3800:4#enable stp
Command: enable stp
Success.
DES-3800:4#
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Parameters
<value 1-4> [add_vlan | remove_vlan] <vidlist>
<value 1-4>
<value 0-61440> instance_id <value 0-4>
{revision_level <int 0-65535> | name <string>}
<portlist> instance_id <value 0-> {internalCost [auto | value 1-
200000000] | priority <value 0-240>}
{<portlist>}
{<value 0-4>}
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
None.
Only administrator-level users can issue this command.
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only administrator-level users can issue this command.
75