D-Link xStack DES-3800 Series Cli Manual page 129

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config address_binding ip_mac ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config address binding on the switch:
config address_binding ip_mac ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config address binding on the switch:
Used to Configure a IP-MAC Binding entry.
<ipaddr> mac_address <macaddr>
This command will configure an IP-MAC Binding entry.
<ipaddr> The IP address of the device where the IP-MAC binding
is made.
<macaddr> The MAC address of the device where the IP-MAC
binding is made.
Only administrator-level users can issue this command.
DES-3800:4#config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05
Command: config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05
Success.
DES-3800:4#
Used to configure an IP-MAC state to enable or disable for
specified ports.
[<portlist> | all] state [enable | disable]
This command will configure IP-MAC state to enable or disable for
specified ports.
<portlist> − Specifies a port or range of ports.
all – specifies all ports on the switch.
state [enable | disable] – Enables or disables the specified range
of ports.
Only administrator-level users can issue this command.
DES-3800:4#config address_binding ip_mac ports 2 state
enable
Command: config address_binding ip_mac ports 2 state
enable
Success.
124