D-Link xStack DES-3800 Series Cli Manual page 40

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-3800:4#show snmp view
Command: show snmp view
Total Entries: 11
DES-3800:4#
create snmp community
Purpose
Syntax
Description
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Used to create an SNMP community string to define the relationship between the
SNMP manager and an agent. The community string acts like a password to permit
access to the agent on the Switch. One or more of the following characteristics can
be associated with the community string:
An Access List of IP addresses of SNMP managers that are permitted to use the
community string to gain access to the Switch's SNMP agent.
An MIB view that defines the subset of all MIB objects that will be accessible to the
SNMP community.
read_write or read_only level permission for the MIB objects accessible to the SNMP
community.
create snmp community <community_string 32> view <view_name 32>
[read_only | read_write]
The create snmp community command is used to create an SNMP community
string and to assign access-limiting characteristics to this community string.
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
35
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included