D-Link xStack DES-3800 Series Cli Manual page 78

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config system_severity
•
Choose one of the following to identify what level of severity warnings are to be sent to the
destination entered above.
critical – Entering this parameter along with the proper destination, stated above, will instruct
warning – Entering this parameter along with the proper destination, stated above, will
information – Entering this parameter along with the proper destination, stated above, will
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the system severity settings for critical traps only:
DES-3800:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DES-3800:4#
sent to the Switch's log for analysis.
all – Entering this parameter will define which events occurring on the Switch will be sent
to a SNMP agent and the Switch's log for analysis.
the Switch to send only critical events to the Switch's log or SNMP agent.
instruct the Switch to send critical and warning events to the Switch's log or SNMP
agent.
instruct the switch to send informational, warning and critical events to the Switch's log
or SNMP agent.
73