D-Link xStack DES-3800 Series Cli Manual page 117

Layer 3 stackable fast ethernet managed switch
Hide thumbs Also See for xStack DES-3800 Series:
Table of Contents

Advertisement

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Command: create vlan v1 tag 2
Success.
DES-3800:4#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the vlan "v1":
DES-3800:4#delete vlan v1
Command: delete vlan v1
Success.
DES-3800:4#
config vlan
Purpose
Syntax
Description
Parameters
Restrictions
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
Switch.
<vlan_name 32> − The VLAN name of the VLAN you want to delete.
Only administrator-level users can issue this command.
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[add [tagged | untagged |
forbidden] | delete] <portlist> | advertisement [enable | disable]}
This command allows you to add ports to the port list of a previously
configured VLAN. You can specify the additional ports as tagging,
untagging, or forbidden. The default is to assign the ports as
untagging.
<vlan_name 32> − The name of the VLAN you want to add ports to.
add − Entering the add parameter will add ports to the VLAN. There
are three types of ports to add:
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the
specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the
specified VLAN.
Only administrator-level users can issue this command.
112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3828pDes-3828Des-3828dc

Table of Contents