D-Link xStack DES-3800 Series Cli Manual page 153

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DHCP relay:
disable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable DHCP relay:
Used to enable the DHCP/BOOTP relay function on the switch.
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on the switch.
None.
Only administrator-level users can issue this command.
DES-3800:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-3800:4#
Used to disable the DHCP/BOOTP relay function on the switch.
disable dhcp_relay
This command is used to disable the DHCP/BOOTP relay function on the switch.
None.
Only administrator-level users can issue this command.
DES-3800:4#disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-3800:4#
148