ICPDAS ECAT-2610 User Manual page 30

EtherCAT to Modbus RTU Gateway
Step 7
Starting upload
1. Click the "UPLOAD CONFIGURATION" button to upload the configuration file to ECAT-2610 and
the status column will be displayed the progress of the upload.
2. The "ECAT-2610 CFG TOOL" dialog box will be displayed asking you to reboot the ECAT-2610
module.
3. Power off and power on the ECAT-2610 module and click the "OK" button to continue.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
Figure 4-2.7
Figure 4-2.8
- 30 -