Table of Contents
Advertisement
EtherCAT to Modbus RTU Gateway
Step 4
Configuring the Net ID , Baud Rate and Data Format
Click the module name to open the configuration dialog box.
Set the Address (Net ID), Baud Rate and Data Format for Modbus RTU device.
Click "Set Module Configurations" button to save the new configuration.
NOTE
If there are multiple Modbus RTU devices on the RS‐485 network, each of them needs be
assigned with a unique Net ID.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
Figure 4-1.5
- 25 -
Advertisement
Table of Contents
