ICPDAS ECAT-2610 User Manual page 100

EtherCAT to Modbus RTU Gateway
Step 9
Upload the Configuration file (commands.txt) to the ECAT-2610.
 A Command Prompt windows will be displayed and type "E:" (7188ECAT folder location on your
hard drive) and the press Enter.
 Type "cd 7188ecat" and the press Enter.
 Type "execcom4" and the press Enter to auto run the 7188ECAT.exe program.
NOTE
The execCOM1.bat/execCOM2 is designed to use COM1/COM2 of Host PC to download. If the PC COM Port is not
default 1 or 2, refer to Step 7 (Figure A3-6) to modify the COM Port number.



Figure A3-8
 Power-on the ECAT-2610 module.
This ECAT-2610 is a brand new one, so there
is one default command in the EEPROM.
Figure A3-9
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved. - 100 -