EtherCAT to Modbus RTU Gateway
Step 2
Run the 7188ECAT.exe (Configuration/Diagnostic Utility)
1. In the Search field, type "cmd" and the press Enter to open the Command Prompt window.
Figure 6-1.2
2. A Command Prompt window will be displayed and type "e:" (7188ECAT folder location on your
hard drive) and the press Enter.
3. Type "cd 7188ecat" and the press Enter.
4. Type "execcom4" and the press Enter to auto run the 7188ECAT.exe program.
Figure 6-1.3
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
- 48 -