Features; Block Diagram - ICPDAS ECAT-2610 User Manual

EtherCAT to Modbus RTU Gateway

1.1 Features

Powerful MCU handles efficient network traffic.

2 x RJ-45 bus interface.

Integrate RS-232/422/485 serial device to EtherCAT interface.

Allows system integrators to retro-fit older automation devices into modern EtherCAT

communication structures.
Requires no hardware or software changes to be made to the connected device.

Compatible with all PLCs with EtherCAT support.

Performs complete serial protocol conversion, no PLC function blocks required.

Supports maximum 128 input and 128 output bytes data.

Supports maximum Baud Rate 115200 bps.


1.2 Block Diagram

The block diagram of the ECAT-2610 module is given as follows:
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
Figure 1-2 Block Diagram of ECAT-2610
- 6 -