Hardware Information; Appearance - ICPDAS ECAT-2610 User Manual

EtherCAT to Modbus RTU Gateway

2. Hardware Information

2.1 Appearance

The front panel and top panel of the ECAT-2610 module contain the Modbus COM Port, PC COM
port, LEDs, Ethernet Port and power connector.
Top Panel
2. EtherCAT Interface
1. DC Power Input Connector
The "PWR(+)" and "GND(-)" pins are used for the power supply applies to all types of ECAT-2610
module. The valid power voltage range is from +12 to +48 V
The definition of "F.G." (Frame Ground): Electronic circuits are constantly vulnerable to
Electrostatic Discharge (ESD), which becomes worse in a continental climate area. ECAT-2610
module feature a new design for the frame ground, which provides a path that bypasses ESD,
resulting in an enhanced ESD protection capability and ensuring that the module is more reliable.
2. EtherCAT Interface
ECAT-2610 module is equipped with two RJ-45 EtherCAT Interface ports. IN is EtherCAT signal input
port that connect EtherCAT Master or EtherCAT signal output of previous EtherCAT slave module，
OUT is EtherCAT signal output that connect the next EtherCAT signal input of EtherCAT slave
module.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
1. DC Power
Input Connector
Figure 2-1
Top panel of ECAT-2610
.
DC
- 7 -