EtherCAT to Modbus RTU Gateway
4.1 Configure the Modbus RTU Device
The following configure method for ICP DAS Modbus RTU device. If your device is a third party
Modbus RTU device, please refer to the specific Quick Start Guide or User Manual for that Modbus
RTU device to setting Modbus ID (Net ID), Baud Rate and Data Format...etc.,.
Step 1
Connect the Modbus device (e.g., M-7050D, optional) to Host PC
CA-0915 Cable
Host PC
Figure 4-1.1
Step 2
Download and Run the DCON Utility Pro Software
For ICP DAS Modbus RTU slave device, the DCON Utility Pro is free download and installation, it can
be obtained from the ICP DAS web site at:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
to search modules out and configure the searched devices.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
RS-232
I-7520
RS-232 to RS-485
Converter
Power Supply
M-7050D
7-ch DI & 8-ch DO
Power Supply
RS-485 Wiring
- 23 -