A3. Manually Configure And Upload - ICPDAS ECAT-2610 User Manual

EtherCAT to Modbus RTU Gateway

A3. Manually Configure and Upload

Step 1
Download the 7188ECAT folder.
The 7188ECAT folder is a configuration and diagnostic utility that can be obtained either from the
companion CD or ICP DAS web site at:
CD:\Napdos\ECAT-2000\Software\
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/
Step 2
Double-click the"commands.txt"to open configuration file.
Step 3
Set the Baud Rate and Data Format depend on Modbus RTU device.
Command Description
115200 Baud Rate Valid Range: 1200 ~ 115200
N Parity: N, E, O
1 Stop Bit: 1, 2
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
Figure A3-1
Figure A3-2
- 96 -