Table of Contents
Advertisement
To keep RTC running during battery exchange, batteries must
be exchanged without delays.
RTC will always be reset, if instrument is stored without bat-
teries for more than 10 seconds.
History data and measurement parameters are stored perma-
nently, even if batteries are removed.
Even without RTC information the relative time information
of logbook and history is corrected to the actual PC clock time
during read out unless the batteries had not been removed
between the event and the data read out.
2.3
Switching the unit on
To switch on the RadEye AB100, keep the ON button pressed
for at least one second. The sound generator (beeper) is initi-
ated. The start screen is displayed for two seconds
Battery
voltage
RadEye AB100
Pi/Ff 04.05.2021
Firmware
version
DB-070 E
Calibration date
Checksum of the
firmware
2-3
Hide quick links:
Advertisement
Table of Contents
