Table of Contents
Advertisement
Figure 7-1: Main Window
7.2.2
Measurements
After pressing the button Read Values the current Count rate and
the current displayed measurement value is displayed in this
frame.
With button Start the measured value is read from the unit at a
certain polling interval. Use the scroll bar to define the polling
interval. You can select a value between 1 and 3600 seconds.
The measured value can be displayed numerically and graphical-
ly. Click on Graphic.... A diagram is displayed that gives a repre-
sentation of the measurement values versus the time.
The current measured value is added at the right-hand side, and
the diagram is shifted to the left. Up to 100 measured values can
RadEye AB100
DB-070 E
7-3
Pi/Ff 04.05.2021
Hide quick links:
Advertisement
Table of Contents
