7.3.8
Menu configuration
Figure 7-12: Menu selection
On the "Functions" tab, the functions available to the user can be
selected to speed up access to frequently needed functions. For
example, if LED alarm is always active and rate level indication
is never used, these functions can be hidden for the user.
Once the setting of the parameters is finished, these parameters
have to be sent to the RadEye AB100 by clicking on the Write to
RadEye AB100 button.
Parameters including the selected menu configuration can be
saved with File / Save as... as parameter file (*.cfg). A saved
configuration can be reloaded using the menu File / Open... and
sent to RadEye AB100.
RadEye AB100
DB-070 E
7-15
Pi/Ff 04.05.2021