3.1.4
Measuring unit
This submenu is used to select the measuring unit for Ratemeter
and Scaler measurements.
3.1.5
Operation mode
This submenu is used to select between ratemeter with ADF,
ratemeter with classic linear filter and scaler mode. The "✓"
shows the active configuration.
3.1.6
Scaler parameter
This submenu is used to set the parameters for Scaler measure-
ments. Preset TimeMode is used to measure a defined time. Pre-
set CntMode is used to measure a defined number of counts. With
"Auto restart" the RadEye AB100 restarts automatically the
RadEye AB100
Pi/Ff 04.05.2021
DB-070 E
3-9