If you want to use this high voltage value as standard, activate the
"Store setting to device EEprom" check box. This allows the high
voltage value set to remain even when the device is switched on
and off.
The "Y axis" frame
8.1.8
Activating the "Automatic" option box causes the Y axis to be
adjusted automatically as a function of the measured values. If
another type of plateau display is required, you need to click on
the "User defined" option box. Once the "User defined" option
box has been activated, the text entry box in this frame becomes
active, allowing a manual entry to be made by the user. Here, the
desired maximum value for the Y axis has to be entered.
Figure 8-8 Setting the scale
RadEye AB100
DB-070 E
8-9
Pi/Ff 04.05.2021