Date and time of the measurement are specified in the columns
under the field names "mm.dd.yy" and "hh:mm:ss". The time
setting corresponds to the PC system time.
The "Counter" column contains the numerical value of the coun-
ter measurement. The "Unit" column informs about the unit.
7.2.4
Select serial interface
Via Configuration / Com settings... menu another window is
opened from which you may select the corresponding interface.
An error message is displayed if the interface is not available.
"Read RadEye" is used to check if the right Com port is selected.
With "Search RadEye" the program checks every available Com
port for a RadEye. Please do not use the option "Connected via
Bluetooth".
.
Figure 7-3: Select serial interface
7-6
DB-070 E
RadEye AB100
Pi/Ff 04.05.2021