Table of Contents
Advertisement
(located above the plateau chart), the plateau's graphic chart, the
list of plateau data including the selected measured values (Rate
1, Rate 2, etc.) and the status display beneath the list.
The version, serial number and high voltage of the RadEye
AB100 are shown in the Device frame
The "Parameters" frame shows the actual parameters for the plat-
eau measurement. Each time a plateau is loaded, the respective
parameters saved are shown on the screen.
By pressing the "Parameter" button the parameter window is
opened
Pressing "Start plateau measurement" will start a new measure-
ment
To print the plateau measurement indicated using your current
Windows printer press the "Print" button. This button only be-
comes active when the plateau measurement has been completely
terminated or after loading a saved plateau measurement
By double-clicking on the graphic chart, the latter can be en-
larged.
8-2
DB-070 E
RadEye AB100
Pi/Ff 04.05.2021
Hide quick links:
Advertisement
Table of Contents
