4. Operation
4.1
Audible single pulse indication (recommended)
With the single pulse indication being selected,
the detector generates a short audible signal emitted by the beep-
er.
An audible alarm signal caused by exceeding the alarm threshold is
not given while single pulse indication or finder mode is active.
The single pulse indication must be enabled in the menu.
It is activated and deactivated by two times pressing the right (►)
or top button:
For high background count rates it is possible adjust this audible
indication via the PC-software RadEye.exe. The "single pulse divi-
sor" is set to 10, so that after every 10 detected radiation particles 1
audible pulse would be generated.
RadEye AB100
Pi/Ff 04.05.2021
Indication of activated
single pulse indication
DB-070 E
each pulse of
4-1