Table of Contents
Advertisement
Once you have pressed OK to confirm the entries, the measure-
ment logfile is created and the polling measured data is stored in
the scan interval you have defined. An open measurement file is
indicated by the name and the path of the measurement logfile
that appears in the top right-hand corner of the window.
To terminate data storage, open the File menu and select the
Close Logfile menu item. No further data is recorded.
Open the File / View Logfile... menu to view the measurement
logfile.
For training and demonstration a prior recorded logfile can be
replayed by opening Replay logfile.
With the buttons Start and Stop together with the polling interval
the replay can be controlled.
Close Replay switches back to accessing measurement values via
infrared interface.
The measurement logfile is an ANSI text file with columns that
are separated by <TAB>. This enables this file to be read easily
into other programs (such as Excel) where the data can be pro-
cessed.
The first line of the measurement logfile contains the unit name,
the file name, and the path. Serial number and Device identifica-
tion are specified on the second line.
RadEye AB100
DB-070 E
7-5
Pi/Ff 04.05.2021
Hide quick links:
Advertisement
Table of Contents
